This board is a VMEbus CPU board with an onboard PowerPC440GX by AMCC.
The input/output interfaces are two Gigabit Ethernet(2ch), serial ports(4ch).
Also, a variety of memory can be used, including SO-DIMM socket (DDR-SDRAM),CompactFlash, FLASH memory, SRAM, and EEPROM.
The VME interface bus, which is an external bus, has an on-board Advanet PCI-VME bridge, the “NARUTO II.” The PMC module is also expandable, and is a single-board computer offering a broad array of applications.
- VME bus CPU board with the on-board PowerPC440GX(667MHz) by AMCC
- In addition to a 32KB command/data L1-cache, on-chip SRAM (256kB) can be used as an L2 cache
- Equipped with an SO-DIMM socket (DDR333, maximum 512MB, module is optional)
- The main memory is dual port memory that also enables access from the VME bus
- 4 on-board DMA controller channels and DMA transfer between main memory and PCI is enabled (on-board function of the CPU)- Equipped with 2 channel Gigabit Ethernet (CPU internal MAC + PHY, RJ-45×2)
- Can use Compact Flash as the storage device (provied with socket; module is optional)
- The RS232C serial port is equipped with 4ch (internal CPU functions (2ch) + external UART (2ch), RJ-45×4)
- 512kB Boot ROM(FLASH Memory)
- The 512kB SRAM and real time clock are backed up with a lithium battery
- Provided with 256B serial EEPROM (nonvolatile memory)
- Equipped with a single 64bit/33MHz PMC slot, facilitating easy expansion of various functions
- Interface with the VME bus by the Advanet PCI-VME bridge, “NARUTO II”
- Can operate as a VME bus master or slave
- 6U (double height), single slot width VME bus port
- Operates with a single 5V power supply from the VME bus
|
