Products_Embedded Board Advanet Inc.

This product has been discontinued.

A successor model is currently under development.

Please contact us for further details.

Overseas Business Development, Advanet Inc.

TEL: +81-86-245-2861

Email sales@advanet.jp

Features

16-bit resolution, VME bus compliant board with a 16-channel D/A converter
±10V output range that can be expanded to ±12V by installing a resistor for output range expansion
All channels are equipped with an independent trimmer for gain and offset adjustment, allowing highly accurate adjustment for each channel
High resolution (16-bit) and multiple channels (16 channels)
Output channels are isolated from the VME bus
Equipped with an output short-circuit protection function
Operates from a single +5V power supply by VME bus
When the power is turned on and when reset is performed, the output voltage is forced to 0V
LED lamp indicates bus access
C-language sample program provided
Device driver for VxWorks available (option)

Specifications

Note: The following specifications and product appearance are subject to change for enhancement without notice.

Analog output	No. of channels	16ch (single-ended)
	Output range	±10V (can be expanded to ±12V by installing a resistor)
	Output current	Up to ±5mA
	Output impedance	Typ. 0.35Ω
	Output short-circuit protection	Continuous
	Output current	Up to ±5mA
D/A conversion	Resolution	16-bit
	Linearity error	±1LSB (at 25°C) ±2LSB (operating temperature range)
	Differential linearity error	±1LSB (at 25°C) ±2LSB (operating temperature range)
	Monotonicity	15-bit (operating temperature range)
	Gain error	Up to ±0.01% (with adjustment) Typ. ±0.2% (without adjustment) All channels equipped with an independent gain adjustment trimmer
	Offset error	Up to ±0.5mV (with adjustment) Typ. ±10mV (without adjustment) All channels equipped with an independent gain adjustment trimmer
	Conversion time	Up to 1µs per channel (time to transfer data to DAC)
	Temperature characteristics	Up to ±25ppm/°C
Isolation	Isolation method	Photo-coupler (between output channels and VME bus)
Isolation	Withstanding voltage	Between output and system: AC500V for one minute Between output and channels: non-isolated
Output connector		37-pin Dsub female connector
Bus interface		VMEbus Revision C.3 compliant A16: AM codes 29 and 2D D16: D08 (E0)
Power requirements		5V±5% 2.7A (typ.) (received from VME bus)
Board size (excluding protrusions)		262mm x 172mm x 20mm Double height/Single slot (excluding protrusions such as connectors)
Weight		360g(typ.)