Products_Embedded Board Advanet Inc.

RoHS compliant products

Features

12-bit resolution, low-cost analog output board with 16-channel input
Output range can be set to ±10V, 0 to 5V or 0 to 10V for each channel
Equipped with individual refresh and batch refresh output modes
Analog circuits and digital circuits are isolated by photo-coupler
Conversion time of 10µs per channel.
When the power is turned on and at other similar times, the output voltage of all channels is forced to 0V
Each channel has a two layer buffer, allowing the output voltage of all channels to be refreshed simultaneously
Operates from a single +5V power supply by VME bus
Device driver for VxWorks available (option)

Specifications

Note: The following specifications and product appearance are subject to change for enhancement without notice.

Analog output	No. of channels	16 channels
	Output range	0 to 5V, 0 to 10V, ±10V (can be set for each channel)
	Output current	5mA
D/A conversion	Resolution	12-bit
	Output mode	Binary 0 to 5V 0H to FFFH (0 to +5V) 0 to 10V 0H to FFFH (0 to +10.24V) ±10V 0H to FFFH (-10.24 to +10.24V)
	Overall accuracy	±0.3% (F.S. at 25°C)
	Conversion time	10µs per channel
	Temperature characteristics	±50ppm/°C (typ.) Up to ±100ppm/°C
Isolation	Isolation method	Photo-coupler (between analog and digital circuits)
Isolation	Withstanding voltage	Between output and system: AC1500V for one minute
Output connector		MIL-type 34-pin header
Bus interface		VMEbus Revision C.3 compliant A16,D16,D08(EO) Accessible using AM codes 29H and 2DH
Power requirements		5V±5% 0.76A (received from VME bus)
Board size (excluding protrusions)		262mm x 172mm x 20mm Double height/Single slot (excluding protrusions such as connectors)
Weight		345g (typ.)