• line
  • HOME
  • Products
  • contact us
  • about Advanet
  • line
Product info
CPU Board Series
ARCNET Board Series
StarFabric Board Series
Serial RapidIO Series
compactPCIExpress
Compact PCI Board Series
PCIExpress
PCI Bus Board Series
VME Bus Board Series
PMC Board Series
COM Express
Embedded Type Board Series
PoE-compatible module
Isolation Amplifier Series
RackSeries
chart
OEM product
Preliminaly information
 
Manual_software download
VME Bus Board Series
Isolated 64-channel A/D Board
 
Advme2607
 
CatalogPDF Download 188KB
RoHS RoHS compliant products
Features
  • 12-bit resolution, low-cost analog input board with 64-channel single-ended and 32-channel differential input
  • Jumper setting can be used to set the input range for all channels at once to one of the following ranges: ±10V, 0 to 5V or 0 to 10V (4 to 20mA setting is available as an option)
  • Equipped with 64 single-ended and 32 differential input channels, and input is switched between single-ended and differential for all channels at once
  • No isolation between input channels, but analog circuits and digital circuits are isolated by photo-coupler
  • Channels can be switched automatically using a multiplexer for sequential A/D conversion
  • Conversion time of 1920µs for 64-channel batch conversion, and 960µs for 32-channel batch conversion
  • Operates from a single +5V power supply supplied by VME bus
  • Device driver for VxWorks available (option)
Specifications

Note: The following specifications and product appearance are subject to change for enhancement without notice.

Analog input No. of channels 64 channels (single-ended)
32 channels (differential)
Input range Standard: ±10V, 0 to 10V, 0 to 5V
Option: 4 to 20mA
Input impedance Typ. 1MΩ
Input filter 1.6KΩ -3dB
Input connector Two MIL-type dual-row 34-pin headers
A/D conversion Resolution 12-bit
Input mode ±10V 0H to FFFH(-10.24 to +10.24V)
0 to 10V 0H to FFFH(-0.12 to +10.12V)
0 to 5V 0H to FFFH(-0.06 to +5.06V)
1 to 5V 0H to FFFH(0.95 to +5.05V)
Overall accuracy ±0.1% (F.S. at 25°C)
Conversion time 30µs per channel
1920µs (64 channel batch conversion)
960µs (32 channel batch conversion)
Isolation Isolation method Photo-coupler (between analog and digital circuits)
Withstanding voltage Between input and system: AC1500V for one minute
Between input and channels: non-isolated
Bus interface VMEbus Revision C.3 compliant
A16,D16,D08(EO)
Accessible using AM codes 29H and 2DH
Power requirements 5V±5% (supplied by VME bus) 0.76A
Board size (excluding protrusions) 262mm x 172mm x 20mm
Double height, single width
Weight 360g(typ.)
PAGE TOP