*The PoE(Power over Ethernet) modules receive power from Ethernet cable
(No need to prepare individual power supply)
These modules support Lab VIEW as GUI Give away free API for Windows
This module is
DIO / Ethernet converter
which can control various devices
via network.
E-062 PoE-compatible DIO module
RoHS compliant products
Input
Number of channels 16ch
Input form TTL input
Input signal power voltage DC+5V
(maximum rating value:DC+5V)
Output
Number of channels 16ch
Output form Open-drain output
Output voltage tolerance 5V (max)
Maximum output current 25mA (max)
External supply voltage +5V
External supply current 300mA (max)
This module can measure temperature using RTD via network.
E-063 PoE-compatible RTD module
RoHS compliant products
RTD specifications
Measurement method: 3 wire system
Connectable resistance thermometer: Pt100
Temperature input range: -200°C~+600°C
Temperature conversion values: 16 bits
Resolution: 0.1°C
Overall accuracy (25°C) ±(0.15% of rdg + 0.7°C)
Conversion rate: 1.87Hz(Typ.) All channels
No. of temperature input points: 4 points
Pt100 sense current: 1mA
This module can measure temperature using thermocouple via network.
E-064 PoE-compatible TC module
RoHS compliant products
TC specifications
Thermocouple Measured Accuracy
temperature range
K -100~1300℃ ±(0.15% of rdg + 0.7°C)
E -100~1000℃ ±(0.15% of rdg + 0.5°C)
J -100~1200℃ ±(0.15% of rdg + 0.7°C)
T -100~400℃ ±(0.15% of rdg + 0.7°C)
Resolution: 0.1°C
Cold junction compensation accuracy : ±1°C
Conversion rate: 1.50Hz(Typ.) All channels
Number of temperature input points: 4 thermocouple temperature
input points and 1 cold junction compensation
temperature input point
This module is ARCNET / Ethernet converter which can perform ARCNET communication via network.
E-065 PoE-compatible ARCNET module
RoHS compliant products
Number of mounted channels: 1 ch
Used controller: COM20022I-HT
Used transceiver
Model Data transfer bit rate
SN75ALS1178 156.25kbps−10Mbps(non-isolated)
HYC5000 2.5M/5M/10Mbps (isolated)
This module is CAN / Ethernet converter which can perform
CAN communication via network.
E-066 PoE-compatible CAN module
RoHS compliant products
Number of ports: 1 ch
Transmission method: CAN protocol Revision 2.0B
Data buffer: Up to 16 with a 0 to 8-byte data length
Transceiver: PCA82C250T(Philips)
Controller: FlexCAN port with MCF5282
Isolation method: Photo-coupler (Avago:HCPL-0720-000E)
Baud rate: Up to1Mbps
Connector: XM2C-0912-112
(D-SUB 9pin male connector)
This module is DeviceNet / Ethernet converter which can perform
DeviceNet communication via network.
E-067 PoE-compatible DeviceNet module
RoHS compliant products
Number of ports: 1 ch
Transmission method: CAN protocol Revision 2.0B
Data buffer: Up to 16 with a 0 to 8-byte data length
Transceiver: PCA82C250T(Philips)
Controller: FlexCAN port with MCF5282
Isolation method: Photo-coupler (Avago:HCPL-0720-000E)
Baud rate: 125kbps / 250kbps / 500kbps
Connector: HR31-5.08R-5PDL(72)
