| Input |
Number of points |
16 points (common: 2 independent inputs for every 8 points) |
| Isolation method |
Photo-coupler isolation (anode common) |
| Input resistance |
Approx. 3kΩ |
| Applied voltage |
DC12 to 24V |
| Withstanding voltage |
AC1500V for one minute |
| Protection circuitry |
Diode for protection against reverse voltage application |
| Output |
Number of points |
16 points (common: 2 independent outputs for every 8 points) |
| Isolation method |
Photo-coupler isolation open collector output (emitter common) |
| Rated applied voltage |
DC12 to 24V |
| Absolute maximum applied voltage |
DC50V |
| Maximum load current |
50mA |
| Output saturation voltage |
1.2V(typ.) |
| Withstanding voltage |
AC1500V for one minute |
| Protection circuitry |
Diode for protection against reverse voltage application |
| Bus interface |
Bus |
PCI bus 33MHz |
| Data bus width |
32-bit |
| Space required |
Contiguous 16Bytes in PCI Memory space |
| Interrupt line |
INTA |
| Power requirements |
5V±5% (received from PMC connector),
Typ. 0.3A |
| Connector |
MIL-type 40-pin header connector |
| Board size |
149mm x 74mm x 13.5mm |
| Operating environment |
Operating temperature range |
0 to 60°C |
| Storage temperature range |
-20 to 70°C |
| Operating humidity range |
35 to 80% RH (non-condensing) |
| Storage humidity range |
10 to 90% RH (non-condensing) |
