- 6U (double height), single slot width CompactPCI bus analog output board
- Equipped with a 12-bit resolution D/A converter
- Equipped with 16 analog output channels
- Output voltage range can be set to ±10V, 0 to 10V or 0 to 5V for each channel
- Analog output and digital system isolated by photo-coupler
- When the power is turned on and when reset is performed, the output voltage is forced to 0V for all channels
- Two-layer output buffer for refreshing the output voltage for each channel individually or for all channels at once
- Full HotSwap support
|
Note: The following specifications and product appearance are subject to change for enhancement without notice. |
| Analog output |
No. of channels |
16 channels |
| Input voltage range |
±10V, 0 to 10V, 0 to 5V |
| Isolation method |
Photo-coupler isolation (no isolation between channels) |
| Withstanding voltage |
AC500V for one minute |
| Protection circuitry |
Overvoltage protection circuitry |
| D/A conversion |
Resolution |
12-bit |
| Overall accuracy |
±0.3% |
| Conversion time |
10µsec per channel |
| D/A converter |
AD7568 (Analog-Devices original) |
| Bus interface |
PCI Local Bus Specification Rev.2.2 compliant
PICMG 2.0 R3.0 CompactPCI Specification compliant
PICMG 2.1 R1.0 CompactPCI Hot Swap Specification |
| Power requirements |
DC5V/3.3V±5% (supplied by C-PCI bus) |
| Board size |
6U single slot width |
| Connector |
37-pin Dsub connector (female) |
|
|
