- PCI bus compatible ARCNET board equipped with a COM20022 ARCNET controller
- Intelligent board with onboard SH-CPU to lessen the burden on the host
- Standard-equipped with a RS-485 compatible SN75ALS1178N media transceiver and equipped with a socket that allows a HYC2485, HYC5000 or other transceiver to be fitted depending on the cable type and bit rate
- Equipped with one BNC connector and two RJ-11 modular connectors for cable connection
- Jumper setting can be used to select which connector is used
- Device drivers for Windows 2000 and XP provided
|
Note: The following specifications and product appearance are subject to change for enhancement without notice. |
| ARCNET |
Controller |
COM20022ITQFP |
| Bit rate |
156.25kbps to 10Mbps |
| Transceiver |
SN75ALS1178N (RS-485)
Can be equipped with a HYC2000 or HYC5000 transceiver as an option |
| Connector |
One BNC connector, Two 6-pin modular connectors |
| CPU |
SH7045F(SH-2) 24.5MHz |
| Bus interface |
Bus |
PCI bus |
| Data bus width |
32-bit 33MHz |
| Signaling voltage |
5V |
| Power requirements |
DC5V±5%, 0.6A typ. |
| Board size |
106mm(w) x 175mm(d) (excluding protrusions) |
|
Adpci1542: Non-isolated RS-485 type
Adpci1542-2000: Low-speed isolated RS-485 transceivers (Adpci1542 and HYC2000)
Adpci1542-5000: Isolated RS-485 transceivers that support 10Mbps (Adpci1542 and HYC5000) |
 |
|
