| Input |
No. of channels |
64 channels (common for every 8 channels x 8) |
| Isolation method |
Photo-coupler isolation (anode common) |
| Input resistance |
Approx. 3kΩ |
| Applied voltage |
DC12V to 24V |
| Input current |
Approx. 7.6mA (for DC24V application) |
| Withstanding voltage |
AC1500V for one minute |
| Protection circuitry |
Diode for protection against reverse voltage application |
| Turn-on time |
Typ. 3.4µsec. |
| Turn-off time |
36µsec typ. 16 points (common: 2 independent inputs for every 8 points) |
| Output |
No. of channels |
64 channels (common for every 8 channels x 8) Protection circuitry Diode for protection against reverse voltage application |
| Isolation method |
Photo-coupler isolation open collector output (emitter common) |
| Rated applied voltage |
DC12V to 24V |
| Absolute maximum applied voltage |
DC50V |
| Maximum load current |
50mA |
| Output saturation voltage |
1.2V(typ.) |
| Withstanding voltage |
AC1500V for one minute |
| Protection circuitry |
Diode for protection against reverse voltage application |
| Turn-on time |
1.7µsec typ. |
| Turn-off time |
330µsec typ. |
| Bus interface |
Bus |
33MHz CompactPCI bus |
| Data bus width |
32-bit |
| Space required |
Contiguous 64Bytes in PCI I/O space |
| Interrupt line |
INTA |
| Interrupt trigger |
Digital input (DIN0 to7) change-of-state (edge polarity is programmable) |
| Power requirements |
DC5V±5% (supplied by rack), Typ. 0.95A |
| Board size |
6U single slot width 160mm x 233.35mm x 1.6mm |