| Input |
Number of points |
16 points (common: 2 independent inputs for every 8 points) |
| Isolation method |
Photo-coupler isolation (anode common) |
| Input resistance |
Approx. 3kΩ |
| Applied voltage |
DC12V to 24V |
| Withstanding voltage |
AC1500V for one minute |
| Protection circuitry |
Diode for protection against reverse voltage application |
| Output |
Number of points |
16 points (common: 2 independent outputs for every 8 points) |
| Isolation method |
Photo-coupler isolation open coupler output (emitter common) |
| Rated applied voltage |
DC12V to 24V |
| Absolute maximum applied voltage |
DC50V |
| Maximum load current |
50mA |
| Output saturation voltage |
1.2V (typ.) |
| Withstanding voltage |
AC1500V for one minute |
| Protection circuitry |
Diode for protection against reverse voltage application |
| Bus interface |
Bus |
33MHz CompactPCI bus |
| Data bus width |
32-bit |
| Space required |
Contiguous 32Bytes in PCI I/O space |
| Interrupt line |
INTA |
| Power requirements |
5V±5% (received from bus), Typ. 0.3A |
| Board size |
160mm x 100mm x 20mm (excluding protrusions)
Interface connector (MIL-type 40-pin header connector) |
| Operating environment |
Operating temperature range |
0 to 60°C |
| Storage temperature range |
-20 to 70°C |
| Operating humidity range |
35 to 80% RH (non-condensing) |
| Storage humidity range |
10 to 90% RH (non-condensing) |
