Analog input module with 4 isolation amp channels built-in
- Output signal range of ±5.5V
- Built-in instrumentation amplifier for differential high-impedance input and high CMR performance Also, gain can be set to any value between 0 and 1000 using an external resistor
- Each input channel, output and 24V power supply are mutually isolated
- Possible to supply an isolated power supply for pre-amplifier (DC8.5V up to 5mA)
|
Note: The following specifications and product appearance are subject to change for enhancement without notice. |
| No. of channels |
4 channels |
| Input range |
±5.5V or less |
| Output range |
±5.5V or less |
| Gain |
Can be programmed between 1 and 1000 using an external resistor |
| Linearity |
±0.05%FS or less |
| Offset voltage |
8+0.2G mV or less |
| Gain drift |
±70ppm/°C or less |
| Frequency range |
1kHz (-3dB) |
| Power requirements |
DC24.0V±10%, Up to 100mA |
| Dielectric strength |
Between input and output: AC1500V (for one minute)
Between input channels: AC500V (for one minute)
Between power supply and output: AC500V (for one minute) |
| Board size |
80mm (W) x 54mm (H) x 14mm (D) |
| Weight |
170g |
| Operating environment |
Operating temperature range: 0 to 70°C Operating humidity range: 90% RH or less (non-condensing) |
|
|
