Analog output module with 4 isolation amplifier channels built-in
- Broad I/O range: ±10V input → ±10V output (gain is 1)
- Uses transformer isolation, which is the most reliable method of isolation, as the isolation method
|
Note: The following specifications and product appearance are subject to change for enhancement without notice. |
| No. of channels |
4 channels |
| Input range |
-10V to +10V |
| Output range |
-10V to +10V |
| Gain |
1.0 |
| Linearity |
±0.05%FS or less |
| Offset drift |
±60µV/°C or less |
| Gain drift |
±40ppm/°C or less |
| Frequency range |
2kHz (-3dB) |
| Input impedance |
1MΩ or more |
| Output impedance |
1Ω or less |
| Load resistance |
10kΩ or more |
| Zero adjustment range |
±5mV |
| Span adjustment range |
±2% |
| Power requirements |
DC15.0V±5%, Typ. 50mA |
| Dielectric strength |
Between input and output: AC1500V (for one minute)
Between output channels: AC500V (for one minute)
(Input channels are not isolated from each other and power input is not isolated. Each input GND and the power GND are shared internally.) |
| Board size |
83mm (W) x 84mm (H) x 42mm (D) |
| Weight |
170g |
| Operating environment |
Operating temperature range: 0 to 60°C Operating humidity range: 90% RH or less (non-condensing) |
|
|
